Exercise continue until you get a flat, smooth surface. Proceed according to the law, "the thinner the chip – the purer the treatment." Exercise number 2. Bevelling and the direction across the grain of wood. The right facet of the bar is more convenient to shoot with both hands. Thumb of the left hands pressed to the edge of a chisel blade bar, and pressing his right hand drives the blade away from you. Credit: gymnast-2011.
The left facet is removed the right hand pulling the blade technique on himself. If you need to cut svilivaemosti fibers on the rule of "chips in shavings." When removing the front bevel his left hand pressed against the upper cavity of the bar, while the right hand pushes forward a chisel. NBA may find it difficult to be quoted properly. Wood is cut across the grain with great effort, so if you need this operation to be performed in several passes or eating broaches the blade on the principle of the pendulum. Exercise number 3. Cutting a curved surface at different angles to the core. Techniques to implement this exercises are shown in four stages of the formation of the curvilinear surface of wood carving. Here, special attention should be paid to the fact, with what force are cut fibers (rings), depending on the angle of towards the core. The steeper the slope, the greater the growth rings are cut and, therefore, the resistance of the wood cutter increases. Depending on this, select the method of cutting. Shows a method of cutting by pulling the blade for one year on the steep sections zaovalivanii bar.
| June 13th, 2020 | Posted in News |